Block Calculator

Reviewed by the CalculatorHub team, edited by James Graham. Method from CalculatorHub methodology. Last verified 2026-06-23.

The Block Calculator computes block from the relation blocks = ceil( (wall area / block face area) x (1 + waste percent / 100) ). It takes 3 inputs (wall area in sq ft, block face area in sq ft, waste allowance in %) and returns the block. Because this is a pure mathematical or physical formula rather than a jurisdiction-specific rule, the result never changes over time: the same inputs always produce the same answer, so you can rely on it whether you are checking homework, sizing a design, or sanity-checking another tool. Enter your values in the fields below and the result updates instantly; you can also share a permalink that pre-fills the exact calculation, which is useful for teaching, reports, or collaboration. For example, with wall area = 200 sq ft, block face area = 0.89 sq ft, waste allowance = 5 %, the block works out to 236, and the worked example further down the page shows every step so you can follow the arithmetic and reproduce it by hand. The method is the standard form documented by CalculatorHub methodology, and the figure above each result carries the date it was last verified. This tool is general information and is not a substitute for professional engineering, medical, financial, or scientific advice; always check critical results against the primary source and your own judgement.